Water based silicate and siliconate solution for hardening and waterproofing existing concrete surfaces subject to high salt exposure or to decrease surface permeability in precast.
Potassium Silicate & Siliconate
|Ideal For Exterior Concrete|
Dries With Only Slight Darkening
|Water Bead & Salt Protection With Densification|
CONCRETE SEALER, HARDENER, DENSIFIER & WATER REPELLENT
- Increases wear resistance for improved surface strength.
- Excellent dustproofing.
- Provides added water repellency.
- Decreased permeability of the surface.
- Improved stain resistance.
- Applies in one flood coat.
- V.O.C. compliant.
- Odorless, non-yellowing water based formulation.
TECHNICAL DATA: Contains less than 100 g/L (0.83 lbs./gal.) volatile organic compounds for concrete sealers. Meets Architectural Coatings Section 183(e) Final Rule limit and all National AIM specifications for all states.
COVERAGE: The following coverage rates are approximate and for estimating purposes only. Specco recommends that a test application be made on the actual surface to be treated, to accurately determine coverage rates, effectiveness and influence on surface appearance aesthetics.
Concrete - steel troweled - 200 to 250 square feet per gallon
Concrete - broom finished - 150 to 200 square feet per gallon
Concrete - precast - 100 to 150 square feet per gallon